Package com.softwaremining.cics.constants

Class CicsCodes

java.lang.Object

com.softwaremining.cics.constants.CicsCodes

Direct Known Subclasses:

CicsConditionManager, CicsDBResponseCodes

public class CicsCodes
extends Object

Cics Response codes. 2006-08-23 : A new set of values have been assigned to ALL constants. This is based on conversion of HEX values presented on IBM Documentation page: http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/index.jsp?topic=/com.ibm.cics.ts31.doc/dfhp4/topics/dfhp4_eibfields.htm 2006-08- (ref-a) : The original values are taken from IBM documentation pages such as : http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/topic/com.ibm.cics.ts31.doc/dfhp4/commands/dfhp4_read.htm

Field Summary

Fields

Modifier and Type	Field	Description
static final int	CHANNELERR
static final int	CONTAINERERR
static final int	DISABLED	A file is disabled because it was initially defined as disabled and has not since been enabled.
static final int	DSIDERR	unrecoverable error Unhandled - not used, error code 300 is not correct
static final int	DUPKEY	A record is retrieved by way of an alternate index with the NONUNIQUEKEY attribute, and another alternate index record with the same key follows In assembler language, if the SET option is being used, the specified register has not been set, but can be loaded from DFHEITP1.
static final int	DUPREC
static final int	ENDDATA
static final int	ENDFILE	An end-of-file condition is detected during the browse.
static final int	ENQBUSY
static final int	EOC	Deprecated.
static final int	EODS
static final int	EOF
static final int	ERROR	default program handler
static final int	FILENOTFOUND	The file name supplied in the FILE option cannot be found in the FCT.
static final int	ILLOGIC
static final int	INBFMH
static final int	INTERRUPTED
static final int	INVERRTERM	(not-used) used in CICS Routing - system does not require invalid-terminal / routing to terminal is not supported
static final int	INVLDC	(not-used) This is used in CICS SEND occurs if the specified LDC mnemonic is not included in the LDC list for the logical unit.
static final int	INVMPSZ	Not Supported yet
static final int	INVREQ	(not-used) INvalid-REQuest..
static final int	IOERR	For VSAM files, IOERR normally indicates a hardware error.
static final int	ISCINVREQ	The remote system indicates a failure that does not correspond to a known condition.
static final int	ITEMERR	Not handled yet For CICS WRITEQ: Occurs for the following conditions: The item number that is specified or implied by a WRITEQ TS command with the REWRITE option is not valid (that is, outside the range of entry numbers that are assigned for the queue).
static final int	LENGERR	10 - Neither the LENGTH option nor the SET option is specified on a READ command for a file with variable-length records or for a BDAM file with variable-length or undefined-format records.
static final int	LOADING	The request cannot be satisfied because it is issued against a data table that is still being loaded.
static final int	LOCKED	An attempt is being made to read a record either specifying the UPDATE keyword, or specifying (explicitly or implicitly) CONSISTENT or REPEATABLE, but the record is locked by a retained lock (see Retained and active locks).
static final int	MAPFAIL	This condition is fired during a CICS RECEIVE when operator did not change/enter any field-values Not sure what sets this The value has been set from http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/index.jsp?topic=/com.ibm.cics.ts31.doc/dfhp4/topics/dfhp4_eibfields.htm
static final int	NOHANDLE	to do
static final int	NORMAL	*** NOT VALIDATED AGAINST IBM CODES **** Normal termination of operation Default action: terminate the task abnormally
static final int	NOSPACE
static final int	NOTAUTH	A resource security check has failed on FILE(filename).
static final int	NOTFND	An attempt to retrieve a record based on the search argument provided is unsuccessful.
static final int	NOTOPEN	NOTOPEN (RESP2 60) is returned for one of the following reasons: The requested file is CLOSED and UNENABLED.
static final int	OPENERR	Used in SPOOL
static final int	OVERFLOW	Not handled yet - used in statements such as EXEC CICS HANDLE CONDITION OVERFLOW ...
static final int	PGMIDERR	to do Not sure what sets this The value has been set from http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/index.jsp?topic=/com.ibm.cics.ts31.doc/dfhp4/topics/dfhp4_eibfields.htm
static final int	QIDERR	READQ TS Error Occurs if the specified queue cannot be found in either main or auxiliary storage
static String	RCODE_ALLOCERR
static String	RCODE_CBIDERR
static String	RCODE_CHANNELERR
static String	RCODE_DISABLED
static String	RCODE_DSSTAT
static String	RCODE_DUPKEY
static String	RCODE_DUPREC
static String	RCODE_ENDDATA
static String	RCODE_ENDFILE
static String	RCODE_ENDINPT
static String	RCODE_ENQBUSY
static String	RCODE_ENVDEFERR
static String	RCODE_EOC
static String	RCODE_EODS
static String	RCODE_EOF
static String	RCODE_EXPIRED
static String	RCODE_FILENOTFOUND
static String	RCODE_FUNCERR
static String	RCODE_IGREQCD
static String	RCODE_IGREQID
static String	RCODE_ILLOGIC
static String	RCODE_INBFMH
static String	RCODE_INVERRTERM
static String	RCODE_INVEXITREQ
static String	RCODE_INVLDC
static String	RCODE_INVMPSZ
static String	RCODE_INVPARTN
static String	RCODE_INVPARTNSET
static String	RCODE_INVREQ
static String	RCODE_IOERR
static String	RCODE_ISCINVREQ
static String	RCODE_ITEMERR
static String	RCODE_JIDERR
static String	RCODE_LENGERR
static String	RCODE_LOADING
static String	RCODE_LOCKED
static String	RCODE_MAPFAIL
static String	RCODE_NETNAMEIDERR
static String	RCODE_NODEIDERR
static String	RCODE_NOJBUFSP
static String	RCODE_NONVAL
static String	RCODE_NOPASSBKRD
static String	RCODE_NOPASSBKWR
static String	RCODE_NOSPACE
static String	RCODE_NOSPOOL
static String	RCODE_NOSTART
static String	RCODE_NOSTG
static String	RCODE_NOTALLOC
static String	RCODE_NOTAUTH
static String	RCODE_NOTFND
static String	RCODE_NOTOPEN
static String	RCODE_OPENERR
static String	RCODE_OVERFLOW
static String	RCODE_PARTNERIDERR
static String	RCODE_PARTNFAIL
static String	RCODE_PGMIDERR
static String	RCODE_QBUSY
static String	RCODE_QIDERR
static String	RCODE_QZERO
static String	RCODE_RDATT
static String	RCODE_RECORDBUSY
static String	RCODE_RESUNAVAIL
static String	RCODE_RETPAGE
static String	RCODE_ROLLEDBACK
static String	RCODE_RTEFAIL
static String	RCODE_RTESOME
static String	RCODE_SELNERR
static String	RCODE_SESSBUSY
static String	RCODE_SESSIONERR
static String	RCODE_SIGNAL
static String	RCODE_SPOLBUSY
static String	RCODE_SPOLERR
static String	RCODE_STRELERR
static String	RCODE_SUPPRESSED
static String	RCODE_SYSBUSY
static String	RCODE_SYSIDERR
static String	RCODE_TERMERR
static String	RCODE_TERMIDERR
static String	RCODE_TRANSIDERR
static String	RCODE_TSIOERR
static String	RCODE_UNEXPIN
static String	RCODE_USERIDERR
static String	RCODE_WRBRK
static final int	RECORD_BUSY	The NOSUSPEND keyword is specified and the record is locked by an active lock (see Retained and active locks).
static final int	RECORDBUSY
static final int	RESP2_CODE_DISABLED
static final int	RESP2_CODE_DUPKEY
static final int	RESP2_CODE_DUPREC	An attempt is made to add a record to a data set by referring to a file, or a path over a file (with the UNIQUEKEY attribute), in which the same key already exists.
static final int	RESP2_CODE_ILLOGIC	A VSAM error occurs that does not fall within one of the other CICS response categories.
static final int	RESP2_CODE_NOTOPEN
static final int	RESP2_CODE_RECORD_BUSY
static final int[]	RESP2_CODE_SYSIDERR
static final int	RETPAGE	(not-used) This is used in CICS SEND occurs if the SET option is specified and a completed page is ready for return to the application program.
static final int	RTEFAIL	(not-used) used in CICS Routing - system does not require invalid-terminal / routing to terminal is not supported
static final int	SIGNAL
static final int	SUPPRESSED	A user exit program that is invoked at the XDTAD exit point decides not to add the record to the user-maintained or coupling facility data table.
static final int	SYSBUSY
static final int	SYSIDERR
static final int	TERMERR
static final int	TERMIDERR
static final int	TIMEOUT
static final int	TRANSIDERR	occurs if the transaction identifier specified in a START command cannot be found in the program control table.
static final int[]	USERIDERR
static final int	WRBRK	(not-used) This is used in CICS SEND occurs if a SEND command is interrupted by the terminal operator pressing the ATTN key.

Constructor Summary

Constructors

Constructor	Description
CicsCodes()

Method Summary

Modifier and Type	Method	Description
static boolean	isInRange(long theValue, int[] range)
static boolean	isInRange(long theValue, long expectedValue)
static boolean	isInRange(BigDecimal theValue, int range)
static boolean	isInRange(BigDecimal theValue, int[] range)

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Details

ERROR

public static final int ERROR

default program handler

See Also:

• Constant Field Values

NORMAL

public static final int NORMAL

*** NOT VALIDATED AGAINST IBM CODES **** Normal termination of operation Default action: terminate the task abnormally

See Also:

• Constant Field Values

EOC

public static final int EOC

Deprecated.

EOC has no function, is not used/set by the framework.
End-Of-Chain - used in CICS RECEIVE. In CICS Long pieces of data returned from RECEIVE is broken down into Request-Units (RU). Long messages maybe broken onto many RUs which are chained together. CICS can tell the application when the last RU has been received.

See Also:

• Constant Field Values

NOHANDLE

public static final int NOHANDLE

to do

See Also:

• Constant Field Values

ENDDATA

public static final int ENDDATA

See Also:

• Constant Field Values

DISABLED

public static final int DISABLED

A file is disabled because it was initially defined as disabled and has not since been enabled. A file is disabled because it has been disabled by a SET FILE or a CEMT SET FILE command. Used in read/write Default action: terminate the task abnormally

See Also:

• Constant Field Values

RESP2_CODE_DISABLED

public static final int RESP2_CODE_DISABLED

See Also:

• Constant Field Values

DUPKEY

public static final int DUPKEY

A record is retrieved by way of an alternate index with the NONUNIQUEKEY attribute, and another alternate index record with the same key follows In assembler language, if the SET option is being used, the specified register has not been set, but can be loaded from DFHEITP1. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

RESP2_CODE_DUPKEY

public static final int RESP2_CODE_DUPKEY

See Also:

• Constant Field Values

FILENOTFOUND

public static final int FILENOTFOUND

The file name supplied in the FILE option cannot be found in the FCT. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

RESP2_CODE_ILLOGIC

public static final int RESP2_CODE_ILLOGIC

A VSAM error occurs that does not fall within one of the other CICS response categories. (See EIBRCODE in the description of the EXEC interface block, EXEC interface block.) For user-maintained data tables, this condition occurs only for a non-UPDATE READ during loading when CICS has attempted to retrieve the record from the source data set. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

ILLOGIC

public static final int ILLOGIC

See Also:

• Constant Field Values

INVREQ

public static final int INVREQ

(not-used) INvalid-REQuest.. Used in CICS SEND / Receive for details please see http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/index.jsp?topic=/com.ibm.cics.ts31.doc/dfhp3/dfhp3b00134.htm

See Also:

• Constant Field Values

INVERRTERM

public static final int INVERRTERM

(not-used) used in CICS Routing - system does not require invalid-terminal / routing to terminal is not supported

See Also:

• Constant Field Values

RTEFAIL

public static final int RTEFAIL

(not-used) used in CICS Routing - system does not require invalid-terminal / routing to terminal is not supported

See Also:

• Constant Field Values

ITEMERR

public static final int ITEMERR

Not handled yet For CICS WRITEQ: Occurs for the following conditions: The item number that is specified or implied by a WRITEQ TS command with the REWRITE option is not valid (that is, outside the range of entry numbers that are assigned for the queue). The maximum number of items (32767) is exceeded. FOr CICS READQ: If the item number that is specified or implied by a READQ TS command is not valid (that is, it is outside the range of entry numbers assigned for the queue) If an end of file marker is encountered on a READQ TS NEXT command If this is the first time the queue has been read on a READQ TS NEXT command

See Also:

• Constant Field Values

IOERR

public static final int IOERR

For VSAM files, IOERR normally indicates a hardware error. For user-maintained data tables, this condition occurs only for a non-UPDATE READ during loading when CICS has attempted to retrieve the record from the source data set. For a coupling facility data table, an IOERR indicates a bad response returned from a coupling facility access. (Further information is available in the EXEC interface block, EXEC interface block.) Default action: terminate the task abnormally.

See Also:

• Constant Field Values

ISCINVREQ

public static final int ISCINVREQ

The remote system indicates a failure that does not correspond to a known condition. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

LENGERR

public static final int LENGERR

10 - Neither the LENGTH option nor the SET option is specified on a READ command for a file with variable-length records or for a BDAM file with variable-length or undefined-format records. 11 - The length of a record read with the INTO option specified exceeds the value specified in the LENGTH option; the record is truncated, and the data area supplied in the LENGTH option is set to the actual length of the record. 13 - An incorrect length is specified for a file with fixed-length records. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

LOADING

public static final int LOADING

The request cannot be satisfied because it is issued against a data table that is still being loaded. The condition can be raised for one of the following reasons: The READ specifies a record that has not yet been loaded into a coupling facility data table. Records can be read or modified while a CFDT is loading only if the requested key is within the range of those records already loaded. The LOADING response can also be returned for a coupling facility data table that has failed during loading. For more information about what happens if the load for a coupling facility data table fails, see the description of the XDTLC global user exit in the CICS Customization Guide. The READ specifies the UPDATE option for a user-maintained data table. A user-maintained data table cannot be modified during loading. The READ specifies the GENERIC or GTEQ options for a user-maintained data table. While a UMT is being loaded, you can use read requests with precise keys only. If your application programs encounter the LOADING condition persistently or too frequently, check that this is not caused by conflicting file definitions that reference the same data set. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

LOCKED

public static final int LOCKED

An attempt is being made to read a record either specifying the UPDATE keyword, or specifying (explicitly or implicitly) CONSISTENT or REPEATABLE, but the record is locked by a retained lock (see Retained and active locks). The LOCKED condition can also occur for a READ UPDATE request to a recoverable CFDT that uses the locking model, if the record being read is locked by a retained lock. See the CICS Recovery and Restart Guide for information about investigating retained locks on records in a coupling facility data table. Default action: abend the task with code AEX8.

See Also:

• Constant Field Values

RECORDBUSY

public static final int RECORDBUSY

See Also:

• Constant Field Values

ENQBUSY

public static final int ENQBUSY

See Also:

• Constant Field Values

NOTAUTH

public static final int NOTAUTH

A resource security check has failed on FILE(filename). Default action: terminate the task abnormally.

See Also:

• Constant Field Values

NOTFND

public static final int NOTFND

An attempt to retrieve a record based on the search argument provided is unsuccessful. For data tables, this condition occurs if an attempt to read a record is unsuccessful because there is no entry with the specified key in the data table. This does not mean that there is no such record in the source data set (if the table was created from one); it may be that such a record is present but was either rejected during initial loading by the user exit XDTRD, or was subsequently deleted from the data table. For remote files, this condition occurs if an attempt to read a record is made without keylength specified either in the application or the file definition, and the actual key is longer than 4 characters. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

ENDFILE

public static final int ENDFILE

An end-of-file condition is detected during the browse. RESP2 values: 90

See Also:

• Constant Field Values

EOF

public static final int EOF

See Also:

• Constant Field Values

NOTOPEN

public static final int NOTOPEN

NOTOPEN (RESP2 60) is returned for one of the following reasons: The requested file is CLOSED and UNENABLED. The CLOSED, UNENABLED state is reached after a CLOSE request has been received against an OPEN ENABLED file and the file is no longer in use. You can also make CLOSED, UNENABLED the initial state, by specifying STATUS(UNENABLED) and OPENTIME(FIRSTREF) on the FILE resource definition. (For BDAM files, you use the FILSTAT parameter of DFHFCT TYPE=FILE.) The requested file is OPEN and in use by other transactions, but a CLOSE request against the file has been received. A READ command is issued against a data set that is quiesced, or is being quiesced, as a result of a SET DSNAME QUIESCED or IMMQUIESCED command. The requested file is CLOSED and ENABLED, so CICS has tried to open the file as part of executing the request. This file open has failed for some reason. You should examine the console for messages that explain why the file open has been unsuccessful. This condition does not occur if the request is made to a CLOSED, DISABLED file. In this case, the DISABLED condition occurs. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

RESP2_CODE_NOTOPEN

public static final int RESP2_CODE_NOTOPEN

See Also:

• Constant Field Values

RECORD_BUSY

public static final int RECORD_BUSY

The NOSUSPEND keyword is specified and the record is locked by an active lock (see Retained and active locks). Default action: abend the task with code AEX9.

See Also:

• Constant Field Values

RESP2_CODE_RECORD_BUSY

public static final int RESP2_CODE_RECORD_BUSY

See Also:

• Constant Field Values

SYSIDERR

public static final int SYSIDERR

See Also:

• Constant Field Values

RESP2_CODE_SYSIDERR

public static final int[] RESP2_CODE_SYSIDERR

RESP2_CODE_DUPREC

public static final int RESP2_CODE_DUPREC

An attempt is made to add a record to a data set by referring to a file, or a path over a file (with the UNIQUEKEY attribute), in which the same key already exists. This condition is also raised for a coupling facility data table that uses the contention model, even if another task has read the record with the same key for update. (For a coupling facility data table that uses the locking model, and for all other kinds of files, if another task has read the record for update, it is locked, and the WRITE request waits for the lock to be released, rather than returning a DUPREC response immediately.) Default action: terminate the task abnormally.

See Also:

• Constant Field Values

DUPREC

public static final int DUPREC

See Also:

• Constant Field Values

SUPPRESSED

public static final int SUPPRESSED

A user exit program that is invoked at the XDTAD exit point decides not to add the record to the user-maintained or coupling facility data table. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

QIDERR

public static final int QIDERR

READQ TS Error Occurs if the specified queue cannot be found in either main or auxiliary storage

See Also:

• Constant Field Values

SYSBUSY

public static final int SYSBUSY

See Also:

• Constant Field Values

MAPFAIL

public static final int MAPFAIL

This condition is fired during a CICS RECEIVE when operator did not change/enter any field-values Not sure what sets this The value has been set from http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/index.jsp?topic=/com.ibm.cics.ts31.doc/dfhp4/topics/dfhp4_eibfields.htm

See Also:

• Constant Field Values

INVMPSZ

public static final int INVMPSZ

Not Supported yet

See Also:

• Constant Field Values

PGMIDERR

public static final int PGMIDERR

to do Not sure what sets this The value has been set from http://publib.boulder.ibm.com/infocenter/cicsts/v3r1/index.jsp?topic=/com.ibm.cics.ts31.doc/dfhp4/topics/dfhp4_eibfields.htm

See Also:

• Constant Field Values

RETPAGE

public static final int RETPAGE

(not-used) This is used in CICS SEND occurs if the SET option is specified and a completed page is ready for return to the application program. Default action: return control to the application program at the point immediately following the BMS SEND TEXT command

See Also:

• Constant Field Values

WRBRK

public static final int WRBRK

(not-used) This is used in CICS SEND occurs if a SEND command is interrupted by the terminal operator pressing the ATTN key. It applies only to the 2741 Communication Terminal, and only if write break is supported for CICS.

See Also:

• Constant Field Values

INVLDC

public static final int INVLDC

(not-used) This is used in CICS SEND occurs if the specified LDC mnemonic is not included in the LDC list for the logical unit. Default action: terminate the task abnormally.

See Also:

• Constant Field Values

TRANSIDERR

public static final int TRANSIDERR

occurs if the transaction identifier specified in a START command cannot be found in the program control table.

See Also:

• Constant Field Values

TERMIDERR

public static final int TERMIDERR

See Also:

• Constant Field Values

OPENERR

public static final int OPENERR

Used in SPOOL

See Also:

• Constant Field Values

CONTAINERERR

public static final int CONTAINERERR

See Also:

• Constant Field Values

CHANNELERR

public static final int CHANNELERR

See Also:

• Constant Field Values

DSIDERR

public static final int DSIDERR

unrecoverable error Unhandled - not used, error code 300 is not correct

See Also:

• Constant Field Values

USERIDERR

public static final int[] USERIDERR

TIMEOUT

public static final int TIMEOUT

See Also:

• Constant Field Values

INTERRUPTED

public static final int INTERRUPTED

See Also:

• Constant Field Values

OVERFLOW

public static final int OVERFLOW

Not handled yet - used in statements such as EXEC CICS HANDLE CONDITION OVERFLOW ... EXEC CICS STARTBR

See Also:

• Constant Field Values

EODS

public static final int EODS

See Also:

• Constant Field Values

INBFMH

public static final int INBFMH

See Also:

• Constant Field Values

SIGNAL

public static final int SIGNAL

See Also:

• Constant Field Values

TERMERR

public static final int TERMERR

See Also:

• Constant Field Values

NOSPACE

public static final int NOSPACE

See Also:

• Constant Field Values

RCODE_INVREQ

public static String RCODE_INVREQ

RCODE_EOF

public static String RCODE_EOF

RCODE_EODS

public static String RCODE_EODS

RCODE_ENDINPT

public static String RCODE_ENDINPT

RCODE_SYSIDERR

public static String RCODE_SYSIDERR

RCODE_SESSIONERR

public static String RCODE_SESSIONERR

RCODE_SYSBUSY

public static String RCODE_SYSBUSY

RCODE_SESSBUSY

public static String RCODE_SESSBUSY

RCODE_NOTALLOC

public static String RCODE_NOTALLOC

RCODE_LENGERR

public static String RCODE_LENGERR

RCODE_WRBRK

public static String RCODE_WRBRK

RCODE_RDATT

public static String RCODE_RDATT

RCODE_SIGNAL

public static String RCODE_SIGNAL

RCODE_TERMIDERR

public static String RCODE_TERMIDERR

RCODE_NOPASSBKRD

public static String RCODE_NOPASSBKRD

RCODE_NOPASSBKWR

public static String RCODE_NOPASSBKWR

RCODE_IGREQCD

public static String RCODE_IGREQCD

RCODE_CBIDERR

public static String RCODE_CBIDERR

RCODE_PARTNERIDERR

public static String RCODE_PARTNERIDERR

RCODE_NETNAMEIDERR

public static String RCODE_NETNAMEIDERR

RCODE_TERMERR

public static String RCODE_TERMERR

RCODE_EOC

public static String RCODE_EOC

RCODE_INBFMH

public static String RCODE_INBFMH

RCODE_NOSTART

public static String RCODE_NOSTART

RCODE_NONVAL

public static String RCODE_NONVAL

RCODE_FILENOTFOUND

public static String RCODE_FILENOTFOUND

RCODE_ILLOGIC

public static String RCODE_ILLOGIC

RCODE_LOCKED

public static String RCODE_LOCKED

RCODE_RECORDBUSY

public static String RCODE_RECORDBUSY

RCODE_NOTOPEN

public static String RCODE_NOTOPEN

RCODE_DISABLED

public static String RCODE_DISABLED

RCODE_ENDFILE

public static String RCODE_ENDFILE

RCODE_IOERR

public static String RCODE_IOERR

RCODE_NOTFND

public static String RCODE_NOTFND

RCODE_DUPREC

public static String RCODE_DUPREC

RCODE_NOSPACE

public static String RCODE_NOSPACE

RCODE_DUPKEY

public static String RCODE_DUPKEY

RCODE_SUPPRESSED

public static String RCODE_SUPPRESSED

RCODE_LOADING

public static String RCODE_LOADING

RCODE_ISCINVREQ

public static String RCODE_ISCINVREQ

RCODE_NOTAUTH

public static String RCODE_NOTAUTH

RCODE_QZERO

public static String RCODE_QZERO

RCODE_QIDERR

public static String RCODE_QIDERR

RCODE_QBUSY

public static String RCODE_QBUSY

RCODE_ITEMERR

public static String RCODE_ITEMERR

RCODE_NOSTG

public static String RCODE_NOSTG

RCODE_PGMIDERR

public static String RCODE_PGMIDERR

RCODE_RESUNAVAIL

public static String RCODE_RESUNAVAIL

RCODE_CHANNELERR

public static String RCODE_CHANNELERR

RCODE_ENDDATA

public static String RCODE_ENDDATA

RCODE_TRANSIDERR

public static String RCODE_TRANSIDERR

RCODE_EXPIRED

public static String RCODE_EXPIRED

RCODE_USERIDERR

public static String RCODE_USERIDERR

RCODE_ENVDEFERR

public static String RCODE_ENVDEFERR

RCODE_ENQBUSY

public static String RCODE_ENQBUSY

RCODE_JIDERR

public static String RCODE_JIDERR

RCODE_NOJBUFSP

public static String RCODE_NOJBUFSP

RCODE_ROLLEDBACK

public static String RCODE_ROLLEDBACK

RCODE_RETPAGE

public static String RCODE_RETPAGE

RCODE_MAPFAIL

public static String RCODE_MAPFAIL

RCODE_INVMPSZ

public static String RCODE_INVMPSZ

RCODE_INVERRTERM

public static String RCODE_INVERRTERM

RCODE_RTESOME

public static String RCODE_RTESOME

RCODE_RTEFAIL

public static String RCODE_RTEFAIL

RCODE_PARTNFAIL

public static String RCODE_PARTNFAIL

RCODE_INVPARTN

public static String RCODE_INVPARTN

RCODE_INVPARTNSET

public static String RCODE_INVPARTNSET

RCODE_INVLDC

public static String RCODE_INVLDC

RCODE_UNEXPIN

public static String RCODE_UNEXPIN

RCODE_TSIOERR

public static String RCODE_TSIOERR

RCODE_OVERFLOW

public static String RCODE_OVERFLOW

RCODE_IGREQID

public static String RCODE_IGREQID

RCODE_DSSTAT

public static String RCODE_DSSTAT

RCODE_FUNCERR

public static String RCODE_FUNCERR

RCODE_SELNERR

public static String RCODE_SELNERR

RCODE_INVEXITREQ

public static String RCODE_INVEXITREQ

RCODE_NOSPOOL

public static String RCODE_NOSPOOL

RCODE_ALLOCERR

public static String RCODE_ALLOCERR

RCODE_STRELERR

public static String RCODE_STRELERR

RCODE_OPENERR

public static String RCODE_OPENERR

RCODE_SPOLBUSY

public static String RCODE_SPOLBUSY

RCODE_SPOLERR

public static String RCODE_SPOLERR

RCODE_NODEIDERR

public static String RCODE_NODEIDERR

Constructor Details

CicsCodes

public CicsCodes()

Method Details

isInRange

public static boolean isInRange(BigDecimal theValue,
 int[] range)

isInRange

public static boolean isInRange(long theValue,
 int[] range)

isInRange

public static boolean isInRange(BigDecimal theValue,
 int range)

isInRange

public static boolean isInRange(long theValue,
 long expectedValue)